Curtain Walls, Engineered Into Your Building
From system selection and structural engineering to factory-backed manufacturing and on-site installation — PFM delivers complete curtain wall solutions for stadiums, super high-rises, airports and residential communities worldwide.
One Facade. One Standard. One Responsibility.
A curtain wall is among the most engineering-intensive parts of a building — it must be structurally sound, weather-tight, energy-efficient and architecturally striking, all at once. Most facade problems are not caused by products, but by fragmentation: design, manufacturing, delivery and installation handled by disconnected parties.
PFM changes that. As a full-scope EPC contractor, we treat the facade as one system and one responsibility — from the first sketch to the final mullion.
Our engineers select and optimize the right system for your project conditions, our integrated supply chain manufactures it to a single quality standard, and our construction teams install it with full cross-system coordination.
We don't sell curtain walls. We engineer them into your building — and we stay accountable until they perform.
The result: fewer change orders, shorter schedules and a facade that holds its performance for decades.
See How We WorkThree Reasons Our Facades Deliver
Every curtain wall project we touch runs on the same three commitments.
Design-Led System Selection
We define the right system early — balancing design intent, budget and long-term performance — so facade decisions are made before costs harden, not after.
One-Standard Supply Chain
Aluminum profiles, architectural glass and complete systems from one integrated source — engineered as a system, not assembled from disconnected parts.
End-to-End Delivery
From shop drawings and factory QC to export packaging, logistics and on-site installation support — one team owns the outcome from start to finish.
From Concept to Installed Facade
A five-stage process that keeps design intent, cost and schedule aligned.
System Selection & Budget
Early consultation matching facade strategy with design intent, budget and programme.
Structural & Performance Engineering
Wind load, seismic, thermal and acoustic analysis with BIM and Tekla modelling.
Fabrication & Factory QC
Precision extrusion, CNC machining, finishing, glass processing and pre-assembly.
Logistics & Global Delivery
International-standard export packaging, shipping planning and on-time site delivery.
Installation & Support
In-house installation teams or on-site technical guidance with responsive support.
Curtain Wall Systems We Engineer
Five proven aluminum systems, each matched to a building type, height and design language.
Unitized Curtain Wall
Factory-assembled modular panels that bolt to the structure — built for rapid super high-rise construction and superior weather tightness.
Visible Frame (Stick) System
On-site assembly that adapts to curves, slopes and irregular joints — a natural fit for stadium bowls and iconic envelopes.
Point-Fixed (Spider) System
Frameless, high-transparency glazing on stainless fittings — for lobbies, atria and feature facades that want to disappear.
Window Wall System
Slab-to-slab facades combining window performance with curtain wall aesthetics — efficient for residential towers and mid-rise.
Storefront System
Cost-efficient ground-level glazing for commercial entrances, retail shopfronts and podium levels.
Custom Engineered Systems
Any combination of profiles, glazing, finishes and opening types — fully engineered to your design and local code.
Numbers You Can Specify
Every system is engineered and tested to internationally recognized standards.
| Performance | Typical Capability |
|---|---|
| Wind Resistance | ± 6,000 Pa (project-specific, ASTM E330) |
| Water Tightness | 1,000 Pa (ASTM E331 / AAMA 501) |
| Air Tightness | Class 4 (EN 12207) |
| Thermal Performance | Uw from 1.0 W/m²·K with thermal break and IGU |
| Acoustic Insulation | Up to 45 dB multi-layer sealing |
| Surface Finish | 20-year warranty powder coat, anodizing or PVDF |
Actual values depend on project-specific design, glass configuration and local building codes. Our engineering team provides calculations for your project.
Compliance & Certification
Manufactured and tested to the standards that global projects require.
Quality Certifications
Factory systems and processes verified against international quality schemes.
The Manufacturing Backbone
What you want is consistency. What you often get is fragmentation. Our supply chain brings everything together — under one system, one standard.
Aluminum Profiles
Precision-extruded frames with consistent strength, finish and tolerance, backed by decades of aluminum manufacturing experience.
Extrusion · CNC machining · anodizing · powder coat · PVDF
Architectural Glass
Strict selection and quality control of glazing — tempered, laminated, insulated, Low-E and custom units — meeting international facade standards.
Single / double / triple glazing · Low-E · safety glass
Complete Systems
Profiles, gaskets, fittings and glass engineered as a complete system — not assembled from disconnected parts — for predictable installation.
System-tested · pre-assembled units · global delivery
Our curtain wall systems are manufactured in partnership with Fowall, an engineering-driven facade manufacturer whose integrated supply chain covers aluminum profiles, architectural glass and complete curtain wall systems. Product and application imagery on this page courtesy of Fowall.
Engineered for Every Building Type
Wherever your project sits on the skyline, there is a PFM curtain wall system built for it.
Curtain Walls on Landmark Scale
When a national stadium needed a signature aluminum facade, PFM delivered.
Tajikistan National Stadium — Dushanbe
PFM turned a deserted framework into a national landmark in three years — overcoming structural risks, complex geology and precise aluminum curves to complete the iconic water ripple facade.
From facade engineering and aluminum cladding coordination to lighting, landscape and bridge design, the facade was engineered, supplied and delivered as one accountable system.
What You Get With Every Project
Complete facade engineering from design consultation to on-site installation support.
Facade Design Consultation
System recommendations tailored to your design intent, site conditions and budget.
Structural Calculations
Wind load, seismic performance, glass deflection and full structural analysis.
BIM & 3D Modeling
Forward BIM coordination, clash detection and Tekla shop drawing generation.
Shop Drawings
Detailed fabrication and installation drawings with connection details.
Performance Testing
Support for air infiltration, water penetration, structural and mock-up testing.
Installation Guidance
Remote technical support and on-site installation guidance when required.
Let's Build Your Curtain Wall Solution Together
Tell us about your project — our facade engineering team will come back with the right system recommendation, performance calculations and a tailored delivery plan.
China Guangzhou Headquarters
- Full Name:
- Elaine
- Tel:
+86 18819472586
- Email:
- manager@pfmbuild.com
- WhatsApp:
- 8618819472586
- Address:
- 9th floor, East tower, International design building, 152 huangbian north road, Baiyun district, Guangzhou, China
Tajikistan Dushanbe Office
- Full Name:
- Jason
- Tel:
+992 026881000
- Email:
- jason@marblelegend.com
- WhatsApp:
- 992026881000
- Address:
- Vefa center 405, Bokhtar St, 37/1, Dushanbe, Tajikistan